When it comes to garage door repairs, there are several things that you can do to make the process go smoother. The first step is to clean the rollers and tracks. Check for rust or damage to the sensors. Next, test the safety feature to make sure that it is working properly. ContactGarage Door Repair in Mississauga to get your garage door repaired or installed.
Cleaning the tracks and rollers
The tracks and rollers of your Germantown garage door can become extremely dirty if debris gets stuck between them. Regardless of the type of material your garage door is made of, debris can end up in the tracks. As the rollers roll up and down the tracks, this debris will be dragged up the tracks. This debris will clog the rollers and prevent them from moving easily, preventing your garage door from functioning properly. If you notice any of these symptoms, cleaning the tracks and rollers is the first step in garage door repair.
First, you should clean the tracks and rollers with a damp rag. You can clean the upper and lower sections of the guide track while the door is closed. If you are doing this yourself, you can remove the rollers from the door assembly. Before removing the rollers, make sure that you disconnect the automatic opener and secure the vice grips with your hand. You can then clean the rollers using a degreaser or an air compressor.
Checking for damage to the photo eye
When doing garage door repair, you should check the photo eye for damage. It is responsible for detecting objects in the way of the door when closing. In case the photo eye is damaged, the door will stop closing and retract automatically. You can test the photo eye by intentionally blocking the beam. If it works properly, the door should close automatically. If not, you should take immediate action to repair the photo eye.
If you notice the photo eye is not working properly, check for any physical obstructions or abrasions. It is possible to manually adjust the photo eye. The sensor should be lit when in the correct position. If it doesn’t, try to adjust it again with a leveler. Otherwise, you can clean the sensor with a damp cloth and wipe it dry. The photo eye should be adjusted so that each lens faces the other lens.
Checking for rust on the springs
If your garage door is falling too quickly when it is closed, one of the first things you should check is the springs. Springs are what regulate the lowering and raising of your door, and if one of them is broken, the door won’t support the weight. This could mean that rust is forming on the springs, and you’ll need to replace them to prevent a more serious issue.
You might think that cleaning rust from the springs is easy enough, but in fact, if you’re not careful, you could end up damaging them. It’s easy to clean off light surface rust with a steel brush. However, if you’re not sure whether you should try cleaning the springs yourself, call a professional to do it for you.
Testing the safety feature
One of the most important safety features of your garage door is its safety reversal system. You should test this feature at least once a year to ensure that it is working properly. Testing the safety feature of your garage door is important because if it malfunctions, it could cost you a lot of money. To check if this feature is working properly, follow the instructions below. Test the sensors by placing blocks or bricks under the door. If the door opens and closes smoothly, the sensors are functioning properly.
Another safety feature of your garage door is the photo eye. This safety feature monitors objects that may be in its path. Some older garage doors don’t have this safety feature, but if it is functioning properly, it will help to prevent injury or damage to vehicles. In order to test the photo eyes, wave a long object in front of the door. If the door closes automatically, then you have a malfunctioning photo eye sensor. If the photo eye fails to work, you may need to replace it or clean the garage door.
